Contact

You can reach us
from Monday to Friday
from 7:30 a.m. to 4:30 p.m.

Phone
+49 / 2202 / 28 29 0

Fax
+49 / 2202 / 28 29 29

Email
info@montwill.de

Maling Address
Montwill GmbH
Gustav-Stresemann-Straße 27
51469 Bergisch Gladbach
Germany

M1 Multi-function meter

M1 Multi-function measuring inputs

Item description

The M1-1UR4B.000X.X70AD is a 4-digit meter for direct connection of different sensors. The configuration happens via three front keys or via an optional PC-software.

PU5 Multi-function meter

Multi-function device with universal measuring inputs

Item description

The PU5.000X.1W70D is a 5-digit meter for direct connection of different sensors. The  configuration happens via 4 front keys or via optional PC-software. Optionally available are 4 changeover relays for the monitoring of limit values, interfaces RS232/RS485 for data trans- fer to/from the device, a transmitter supply and analog outputs 0-10VDC, 4-20mA or 0-20mA for further evaluation. A 24Bit resolution, an external channel switching and selectable software functions characterise an established device for industrial use.

TFT1-11 Multifunction measuring instrument

TFT1 Multifunction measuring device with Modbus interface

Item description

With the digital indicator TFT1-11, various sensors can be operatde and the corresponding physical values can be displayed. If temperatures need to be measured via Pt1000, Pt100 or Thermocouple, the temperature is displayed in °C or °F (as selected before). For measuring inputs like e.g. current/voltage, frequency or counter, the scaling and presentation can be freely selected within the display range of  -1999...999. This device comes with 2 swicthing points, which support different kind of operating modes.

Technical Data

Housing 96 x 48 mm
Display 4-digit
14 mm digit height
Colour: red, green, orange or blue display
Range displayed -1999 to 9999
Operation front panel keyboard protection class IP65
Input Voltage 0-10VDC
Current 0/4-20mA
Pt100 2-/3-wire
Pt1000 2-wire
Thermocouple type L, J, K, B, S, N, E, R, T
Frequency
Rotation speed
Counter
Pulse input: TTL, HTL/PNP, NPN, Namur
Analogue Output -
Switch point -
Interface -
Power supply 230 VAC
100-240 VAC 50/60 Hz / DC +/- 10%
24 VDC +/-10% galvanic isolated
Sensor supply -
Software properties
  • min/max-value recording
  • 5 adjustable supporting points
  • display flashing at threshold value exceedance/undercut
  • Tara function
  • programming interlock via access code
Downloads Data sheet and price list
Manual
Housing 96 x 48 mm
Display 5-digit
14 mm digit height
Colour: red
Range displayed -9999...99999
Operation front panel keyboard protection class IP54
Input Voltage 0-10VDC
Current 0/4-20mA
Shunt 15, 35, 75, 150, 300, 500, 1250, 2500mV
Pt100 2-/3-/4-wire -200,0...850,0°C
Thermocouple type L, J, K, B, S, N, E, R, T
Resistance 100Ohm, 1kOhm, 10 kOhm
Digital input: <2.4V OFF, >10V ON, max. 30 VDC
Analogue Output 0-20 mA Burden ≤500Ohm 12Bit
4-20 mA Burden ≤500Ohm 12Bit
0-10 VDC Burden ≥100kOhm 12Bit
Switch point 2 or 4 relays (change-over contacts)
250 V / 5 AAC, 30 V / 5 ADC
Interface RS232 or RS485 galvanic isolated
Power supply 10-40 VDC / 18-30 VAC 50/60Hz
100-240 VAC 50/60 Hz / DC +/- 10%
Sensor supply 24 VDC / 50 mA
10 VDC / 20 mA
Software properties
  • min/max-memory with adjustable permanent display
  • 30 additional adjustable supporting points
  • display flashing at threshold value exceedance/undercut
  • volume metering (Totaliser)
  • sliding averaging
  • zero-point slowdown
  • adjustable display brightnes
  • selectable display mode
  • hold-/tara function
  • flexible alarm system with adjustable delay times
  • programming interlock via access code
Downloads Data sheet and price list
Manual
Housing 96 x 48 mm
Display TFT display
4-digit
Digit height 15 mm
Multicolour backlight
Metering point & signal identification up to max. 15 characters
Range displayed -1999 to 9999
Operation front panel keyboard protection class IP65
Input Voltage 0-10VDC
Current 0/4-20mA
Shunt
Pt100 2-/3-wire
Pt1000 2-wire
Thermocouple type L, J, K, B, S, N, E, R, T
Impulse input
Frequency
Counter
Rotation speed
Power supply 100-240 VAC 50/60 Hz / DC +/- 10%
230 VAC
24 VDC +/-10% galvanic isolated
Software properties
  • display panel 2,4", 320x240 Pixel
  • selectable colour for measuring value and background (red, green, white, black, orange)
  • minimal installation depth: 25 mm without plug-in terminal, with transformer 42 mm
  • display of metering point and signal description
  • adjustable dimension character
  • min/max-value recording
  • 9 adjustable supporting points
  • display flashing at threshold value exceedane/undercut
  • Tara-function
  • programming lock via access code
  • pluggable screw terminal
  • 2 switching points (changer)
Downloads Data sheet and price list
Manual