Digital indicator M2 melt pressure strain gauges
96 x 48 mm

Montwill Produkte: Digital indicator M2 melt pressure strain gauges 96 x 48 mm

Item description

The M2-1MR5B.020X.570xD is a 5-digit meter for power/weight measuring via strain gauges with a switching contact of 80% alignment and a visual limit value monitoring via the display. The configuration happens via 4 front keys or via the optional PC-software PM-TOOL. For a further evaluation, two switching points are optionally available. Many selectable software functions, the direct limit value adjustment in operating mode and the compact installation depth of 89 mm create a solid device concept.

Digital indicator M3 melt pressure strain gauges
96 x 48 mm

Montwill Produkte: Digital indicator M3 melt pressure strain gauges 96 x 48 mm

Item description

The M3-1MR5B.020X.S70xD is a 5-digit meter for measuring power/weight via strain gauges with switching contact for 80% alignment and a visual limit value monitoring via the display. The configuration happens via 4 front keys or via the optional PC-software PM-TOOL. Optionally available are two analog outputs, the interfaces RS232/RS485 and up to 8 switching points. Many selectable software functions and a direct limit value adjustment in operating mode complete the modern device concept.

Panel meter PM5 melt pressure strain gauges
96 x 48 mm

Montwill Produkte: Panel meter PM5 melt pressure strain gauges 96 x 48 mm

Item description

The PM5.020X.1S70 with a 4-wire-system and an additional
calibration contact for the 80% alignment, was designed for sensor sizes which are based on strain gauges. This must not necessarily be used, as the device is suitable for any other strain gauge measuring. Therefor the device provides a regulated 10 V bridge supply. The 5-digit display shows the measurements, respectively the scaled value of the measured variable. Optionally available are 4 changeover relays for the monitoring of limit values, the interfaces RS232/RS485 for data transfer to/from the device and analog outputs 0-10 VDC, 4-20 mA or 0-20 mA for further evaluation.

head24

Montwill Produkte: head24

Item description

bodytext4

Technical Data

Housing 96 x 48 mm
Display 5-digit
14 mm digit height
Colour: red, green, orange or blue display
Range displayed -19999 to 99999
Operation front panel keyboard protection class IP65
Input DMS / Melt pressure: 1 mV/V, 2 mV/V, 3.3 mV/V free up to 4 mV/V
with 80% calibration
Digital input: <2.4V OFF, >10V ON, max. 30 VDC
Analogue Output
Switch point 2 relays (change-over contact)
250 V / 5 AAC, 30 V / 5 ADC
Interface
Power supply 230 VAC
10-30 VDC galvanic isolated
Other voltage supplies on demand!
Sensor supply Feeding 10 VDC / 20-40 mA / 250-500 Ohm
Software properties
  • min/max-memory with adjustable permanent display
  • 30 additional adjustable supporting points
  • display flashing at threshold value exceedance/undercut
  • zero-key for triggering of Hold, Tara or setpoint setting
  • standard digital input for triggering of Hold, Tara or setpoint setting
  • flexible alarm system with adjustable delay times
  • mathematical functions like reciprocal value, square root, squaring and rounding
  • sliding averaging
  • brightness control via parameter or front keys
  • programming interlock via access code
Downloads Data sheet and price list
Manual